Amana AMSS960803BN Furnace Error Codes

Single Stage Gas Furnace | Control Board: Integrated Control Module

Not your model? View all Amana models →

Disclaimer
This information is for reference purposes only and does not guarantee accuracy or completeness. Always consult your owner's manual and a licensed HVAC technician for diagnosis and repair. Any actions taken based on this information are at your own risk.

All Error Codes

Code Name Severity DIY?
No LED Signal No LED Signal High ✗ Call a pro →
LED Steady On (Continuous) LED Steady On (Continuous) Info — →
1 Flash 1 Flash High ✗ Call a pro →
2 Flashes 2 Flashes High ✗ Call a pro →
3 Flashes 3 Flashes High ✗ Call a pro →
4 Flashes 4 Flashes High ✗ Call a pro →
5 Flashes 5 Flashes High ✗ Call a pro →
6 Flashes 6 Flashes Critical ✗ Call a pro →
7 Flashes 7 Flashes Medium ✗ Call a pro →
Continuous/Rapid Flash Continuous/Rapid Flash High ✗ Call a pro →

How to Read the Error Code

Single diagnostic LED on integrated control module. Codes are indicated by repeating flash patterns. LED flash code will cease if power to the control module is interrupted through the disconnect or door switch. The control module will automatically attempt to reset from lockout after one hour.

About This Model

The Amana AMSS960803BN is a single stage gas furnace using the Integrated Control Module-series integrated furnace control (IFC) board.